Forming Process of All Steel Radial Tire

 All steel tire require high processing accuracy. In order to ensure the accurate fitting and positioning of each part in the molding operation and to make the belt layer basically keep the design size of the finished tire, molding equipment and technology with special high precision should be used.

 

The process of curing embryo to be vulcanized is called tire forming process, which is precisely and symmetrically combined into an organic whole, such as steel wire subhead covering with rubber tire ring, belt layer and tread according to the processing order and positioning requirements of components.

 

The whole radial tire forming process is very important. The quality of molding process is obviously related to the internal and external quality and using quality of finished products.

 

In order to achieve the quality requirements of uniformity and compactness of all steel radial tires, the following requirements must be paid attention to in the molding process:

 

• Precision of molding machine.

• Setting and stability of molding machine process parameters.

• Quality of semi-finished parts.

• The operation technology level of molding workers.

• Temperature and humidity environment of molding area.

 

There are two molding methods for tyre steel tires, namely one-step molding and two-step molding. At present, the forming process of radial truck tire or passenger car radial tire made by tire manufacturers at home and abroad adopts one-step or two-step molding.

 

If you need any kinds of truck steer tyres, please contact us, as a professional tyre manufacturers in china, AULICE is willing to offer you high quality products.

 


Comments

Post a Comment

Popular posts from this blog

What is the Difference between Radial Ply Tyres and Diagonal Tyres?

Image
Nylon Tyre VS Radial Tyre The so-called diagonal tire refers to the tyre whose cords are arranged diagonally, hence its name. The entire carcass is composed of multiple layers of diagonally crossed nylon cords. The tyre crown and sidewall belong to the same ply, which makes the tyre stress concentrated. The deformation of the sidewall is directly transmitted to the tread, leading to unstable ground contact area and poor ground grip. Moreover, the uneven stress on the tyre tread causes serious wear in the middle and short service life of the tyre. In addition, the diagonal tyre is composed of nylon cords with poor thermal endurance. After running for many times in the alternating environment of cold and hot, the nylon cord becomes fatigued, reducing the tensile force and causing a sudden tyre explosion, which poses a great safety hazard. A lot of tyres that seem to be in perfect condition suddenly explode, causing a huge impact on driving safety. Also, diagonal tyre is with high si
Read more

What's the Difference between Single Steer Tires and Double Steers Tires?

Image
  Single Steer Tires   Super single steer tyres  is unidirectional with all force. Its tread patterns are in the same direction with a good grip, so it is suitable for cars that often run at high speed. If there is no abnormal tire wear, you only need to switch back and forth on the same side. If one-sided tire wear occurs or the tire has run more than 10,000 kilometers, the tire needs to be switched from left to right.   The sidewall of super single steer tire  are marked with an arrow and a "Rotation" sign. The direction indicated by the arrow is the rolling direction of the tire. You can use this arrow to tell if the tire is reversed. If the front and rear tires are installed upside down, the tires will shake and wear easily when the vehicle is running.   When installing a single steer tire, the combination of tire and hub should also be considered. Install the tire on the wheel hub according to the specific position of the vehicle and the direction indicated by the arrow
Read more

So Much is Hidden in the Numbers on Truck Tyres

Image
  So Much is Hidden in the Numbers on Truck Tyres   Carefully observing the obvious position on the sidewall of heavy duty tyres , you would find a line of number + letter symbols similar to mathematical functions, such as 12.00 R20, 11.00 R20, 295/80 R22.5. And these numbers represent the basic information of the tyre. Take 12.00 R20 as an example, where 12.00 represents inch in British system, and 12 inch refers to tyre tread width. The larger the number, the wider the tire tread, hence the larger the grounding area, and the tire's grip will be improved to a certain extent.   The last two digits of 20 corresponds to the wheel hub, which is often called the diameter of the rim, in inches. Generally speaking, the larger the diameter of the hub, the greater its bearing strength. Many drivers who pull heavy loads tend to have larger diameter wheels with a certain thickness.   The letter R represents the type of tire. Most of the tires in the past did not have this letter. In the past
Read more