Forklift Tire Replacement Standard

 Many forklift truck drivers are concerned about the standard of tire replacement. The normal service life of forklift tire is 4 to 5 years, because the tread rubber will be aging over time. After 5 years even if the tread wear is minimal, it is best to replace it, because many small cracks are the cause of tire burst.

 

The service life of fork lift tire marks varies with the rubber formulation, vehicle environment and driving habits. Therefore, the driver should pay more attention when driving, because there are also signs of forklift tire aging. For example, the aging parts of the tread are mostly from the edge of the tire or tire shoulder. Exposing to the sun and rain occasionally will cause small looped cracks on the rubber surface. These cracks indicate that the bearing capacity and quality of forklift tires have begun to decline. Forklift tire replacement in advance is needed in order to reduce the risk of tire burst.

 

Some forklift tire change will indicate the real-time wear status of the forklift tires. For forklift tires without wear marks, they can also be measured with calipers (or special forklift tire tread rule). Forklift tires are also subject to natural wear, so the tire of forklift company will mark the wear limit on the sidewall before the tire leaving the factory. Generally, forklift truck tires with groove depth less than 1.6 mm can no longer be used, because the drainage performance and puncture resistance of forklift tires will be greatly reduced. In addition, if a forklift tire has been repaired three to four times, the forklift company would recommend you to replace the forklift tire with a non-driving wheel or rear wheel to reduce the risk of tire burst.

 

As one of the forklift tyre manufacturers, we provide chinese tires for sale, drive tires on tractor, forklift tire replacement, forklift tire maintenance, rubber forklift tires and etc. Want to know more more about forklift tire replacement near me and when to replace forklift tires, contact us.

 


Comments

Post a Comment

Popular posts from this blog

What is the Difference between Radial Ply Tyres and Diagonal Tyres?

Image
Nylon Tyre VS Radial Tyre The so-called diagonal tire refers to the tyre whose cords are arranged diagonally, hence its name. The entire carcass is composed of multiple layers of diagonally crossed nylon cords. The tyre crown and sidewall belong to the same ply, which makes the tyre stress concentrated. The deformation of the sidewall is directly transmitted to the tread, leading to unstable ground contact area and poor ground grip. Moreover, the uneven stress on the tyre tread causes serious wear in the middle and short service life of the tyre. In addition, the diagonal tyre is composed of nylon cords with poor thermal endurance. After running for many times in the alternating environment of cold and hot, the nylon cord becomes fatigued, reducing the tensile force and causing a sudden tyre explosion, which poses a great safety hazard. A lot of tyres that seem to be in perfect condition suddenly explode, causing a huge impact on driving safety. Also, diagonal tyre is with high si
Read more

What's the Difference between Single Steer Tires and Double Steers Tires?

Image
  Single Steer Tires   Super single steer tyres  is unidirectional with all force. Its tread patterns are in the same direction with a good grip, so it is suitable for cars that often run at high speed. If there is no abnormal tire wear, you only need to switch back and forth on the same side. If one-sided tire wear occurs or the tire has run more than 10,000 kilometers, the tire needs to be switched from left to right.   The sidewall of super single steer tire  are marked with an arrow and a "Rotation" sign. The direction indicated by the arrow is the rolling direction of the tire. You can use this arrow to tell if the tire is reversed. If the front and rear tires are installed upside down, the tires will shake and wear easily when the vehicle is running.   When installing a single steer tire, the combination of tire and hub should also be considered. Install the tire on the wheel hub according to the specific position of the vehicle and the direction indicated by the arrow
Read more

So Much is Hidden in the Numbers on Truck Tyres

Image
  So Much is Hidden in the Numbers on Truck Tyres   Carefully observing the obvious position on the sidewall of heavy duty tyres , you would find a line of number + letter symbols similar to mathematical functions, such as 12.00 R20, 11.00 R20, 295/80 R22.5. And these numbers represent the basic information of the tyre. Take 12.00 R20 as an example, where 12.00 represents inch in British system, and 12 inch refers to tyre tread width. The larger the number, the wider the tire tread, hence the larger the grounding area, and the tire's grip will be improved to a certain extent.   The last two digits of 20 corresponds to the wheel hub, which is often called the diameter of the rim, in inches. Generally speaking, the larger the diameter of the hub, the greater its bearing strength. Many drivers who pull heavy loads tend to have larger diameter wheels with a certain thickness.   The letter R represents the type of tire. Most of the tires in the past did not have this letter. In the past
Read more