Truck Tyre Handling Guide



We all know that mining dump truck tires are divided into tire with inner tube and tubeless tire. Today, I'd like to explain the steps of loading and unloading tires with inner tubes.



1. Manual removal steps for semi truck inner tubes

1) The tire should be placed flat on the ground with the valve upward to remove the valve cap and valve core, and the inner tube should be completely deflated;



2) Knock the impact bar along the toe to make the toe of tire fall off;



3) Use a special removal tool to clamp the lock ring, and the other end to jam the rim bolt hole;



4) Insert the lock ring removal rod, remove one end of the lock ring, and pry out the lock ring with the lock ring removal rod;



5) Pay attention to the valve during the disassembly process to prevent the valve from being damaged;



6) Find a small steel ring and press the tire onto the small steel ring, so that the rim and tire can be easily separated;



7) Take out the inner tube and cushion belt and place the components properly.



2. Manual installation steps of tire with inner tube

1) Select appropriate rim and tire, pay attention to the size of rim and tire, and clean rim (Note: foreign matter or rust on rim flange will easily cause tire leakage and tire lip damage).



2) Put the rim flat on the ground, install the lock ring face up, and apply lubricant;



3) Make sure that the inside of the tire is dry and not covered with dust or fine sand, ensure that the valve is installed correctly, and evenly apply talc powder to the inside of the tire;



4) Use a wrench to tighten the screw of the inner tube valve nozzle;



5) Unfold the inner tube carefully, clean the inner tube, fold the valve upward and put it into the outer tube;



6) Remove the valve core with the key of valve core, inflate the inner tube properly to ensure that it is fully expanded in the circumference of the tire, so as to facilitate the installation of the cushion belt;



7) Evenly spread talcum powder on the cushion belt to prevent the inner tube from adhering to the cushion belt during the use of the tire;



8) Install the cushion belt carefully to make it flat and free of wrinkles;



9) With the valve of inner tube facing upward, put the tire on the rim obliquely, and put the valve into the valve slot of the rim;



10) With the help of the crowbar, combine the tire with the rim, and start to circle around the pressure ring from the joint of the lock ring and press the lock ring on the rim;



11) Put the tire in the safety cage to inflate;



12) Install the valve firmly with the special key of valve core;



13) Use a sprinkler to spray water to the valve nozzle assembly, rim flange and tire lip joint to check air tightness, and finally install the valve cap back to the tire valve nozzle and confirm tightening;



14) Clean up the water mark and lubricant on the whole wheel.



Kind reminders

1. It is forbidden to operate the tire when the air pressure is not completely charged;



2. Press the pressure ring with the foot to prevent accidental injury caused by spring during tire construction. If multiple steel rings are constructed at the same time, please place the pressure rings in order to prevent confusion between different pressure rings and wheel hub.



HUBEI AULICE TYRE CO.,Ltd has skid loader tires for sale, welcome to contact us.



Well, that's it for today's guide on skid loader tires for truck tires with inner tubes.



If you want to know more kinds of wholesale tyres china, please visit our website.






Comments

Post a Comment

Popular posts from this blog

What is the Difference between Radial Ply Tyres and Diagonal Tyres?

Image
Nylon Tyre VS Radial Tyre The so-called diagonal tire refers to the tyre whose cords are arranged diagonally, hence its name. The entire carcass is composed of multiple layers of diagonally crossed nylon cords. The tyre crown and sidewall belong to the same ply, which makes the tyre stress concentrated. The deformation of the sidewall is directly transmitted to the tread, leading to unstable ground contact area and poor ground grip. Moreover, the uneven stress on the tyre tread causes serious wear in the middle and short service life of the tyre. In addition, the diagonal tyre is composed of nylon cords with poor thermal endurance. After running for many times in the alternating environment of cold and hot, the nylon cord becomes fatigued, reducing the tensile force and causing a sudden tyre explosion, which poses a great safety hazard. A lot of tyres that seem to be in perfect condition suddenly explode, causing a huge impact on driving safety. Also, diagonal tyre is with high si
Read more

What's the Difference between Single Steer Tires and Double Steers Tires?

Image
  Single Steer Tires   Super single steer tyres  is unidirectional with all force. Its tread patterns are in the same direction with a good grip, so it is suitable for cars that often run at high speed. If there is no abnormal tire wear, you only need to switch back and forth on the same side. If one-sided tire wear occurs or the tire has run more than 10,000 kilometers, the tire needs to be switched from left to right.   The sidewall of super single steer tire  are marked with an arrow and a "Rotation" sign. The direction indicated by the arrow is the rolling direction of the tire. You can use this arrow to tell if the tire is reversed. If the front and rear tires are installed upside down, the tires will shake and wear easily when the vehicle is running.   When installing a single steer tire, the combination of tire and hub should also be considered. Install the tire on the wheel hub according to the specific position of the vehicle and the direction indicated by the arrow
Read more

So Much is Hidden in the Numbers on Truck Tyres

Image
  So Much is Hidden in the Numbers on Truck Tyres   Carefully observing the obvious position on the sidewall of heavy duty tyres , you would find a line of number + letter symbols similar to mathematical functions, such as 12.00 R20, 11.00 R20, 295/80 R22.5. And these numbers represent the basic information of the tyre. Take 12.00 R20 as an example, where 12.00 represents inch in British system, and 12 inch refers to tyre tread width. The larger the number, the wider the tire tread, hence the larger the grounding area, and the tire's grip will be improved to a certain extent.   The last two digits of 20 corresponds to the wheel hub, which is often called the diameter of the rim, in inches. Generally speaking, the larger the diameter of the hub, the greater its bearing strength. Many drivers who pull heavy loads tend to have larger diameter wheels with a certain thickness.   The letter R represents the type of tire. Most of the tires in the past did not have this letter. In the past
Read more