Skid Loader Truck Tires Tutorial

 Truck Tire Inner Tubes for Sale

It's a common knowledge that tires of trucks can be classified as using an inner tube and tubeless, today I will introduce how to skid loader tires for sale for a tire with an inner tube.


1. Steps for removing a tire using a tube manually

1) Put the tire on the ground horizontally, keeping its valve upward. Then, remove the valve cup and the valve core, and blow the tube off completely;


2) Use a tube spanner to knock along the edge of bead toe to make it fall off;


3) Use a professional removal tool to clamp the retaining snap ring, and use the other side of the tool to clamp the rim bolt socket.


4) Insert the retaining snap ring removal rod, remove one side of the retaining snap ring and then prise it.


5) Focus on the valve and avoid damaging it during the process;


6) Find a small steel ring and press the tire on the ring hard, which makes it easy to separate rims from tires;


7) Take off the inner tube and cushion belt, and place all parts properly.


2. Steps for installing a tire using a tube manually

1) Select appropriate rims and tires and pay attention to the size of them. Then, clean the rims (NOTICE: Crud and rusting on bulge of rims may lead to air leaking or damage the bead);


2) Put the rim on the ground horizontally, keeping the retaining snap ring upward, and smear lubricate;


3) Make sure the inside of the tire is dry and there is no dust or sand, and make sure the valve is installed correctly. Then, smear talcum powder on the inside of the tire evenly.


4) Tighten the screw for the valve of inner tube with a wrench;


5) Unfold and clean the inner tube carefully, and the valve should be folded up into outer tire with the valve keeping upward;


6) Take off the valve core with the key, and inflate the inner tube properly to ensure the tire to be fully unfolded so that the installation of the cushion belt can be easier;


7) Smear talcum powder on the cushion belt evenly to prevent the inner tube adhering to the cushion belt during the use of the tire;


8) Install the cushion belt carefully to make it flat without pleats;


9) Keep the valve of the inner tube upward and put the tire on the rim obliquely. After that, put valve into the valve slot of the rim;


10) Combine the tire with the rim with the help of crowbar, and start to circle around  the pressure ring from the joint of the retaining snap ring and press the ring on the rim hard;


11) Inflate the tire in the safety cage;


12) Install the valve firmly with the special key of the valve core;


13) Use a watering can to spray the valve set and the joint of rim flange and tire lip to check the tightness. Finally, install the valve cap back into the valve of tire and confirm the tightening;


14) Clean up water mark and lubricate on the whole wheel.


NOTICE:


1. Don't operate the tire if the pressure is not discharged completely;


2. Put feet on the pressure ring to prevent accidental injury caused by the bounce of the pressure ring during the process. If several steel rings are constructed simultaneously, please place them in order to classify different pressure rings and hubs.

Well, today's tutorial of skid loader trailer tyres for sale for truck's tire using an inner tube is over, do you learn something from it?

 

If you want to know more types of truck tires on skid steer, please visit our website.

 

As one of truck tyre wholesalers, we will do our best to provide more high quality tires for sale, if you have needs, please contact us.

 

 



Comments

Post a Comment

Popular posts from this blog

What is the Difference between Radial Ply Tyres and Diagonal Tyres?

Image
Nylon Tyre VS Radial Tyre The so-called diagonal tire refers to the tyre whose cords are arranged diagonally, hence its name. The entire carcass is composed of multiple layers of diagonally crossed nylon cords. The tyre crown and sidewall belong to the same ply, which makes the tyre stress concentrated. The deformation of the sidewall is directly transmitted to the tread, leading to unstable ground contact area and poor ground grip. Moreover, the uneven stress on the tyre tread causes serious wear in the middle and short service life of the tyre. In addition, the diagonal tyre is composed of nylon cords with poor thermal endurance. After running for many times in the alternating environment of cold and hot, the nylon cord becomes fatigued, reducing the tensile force and causing a sudden tyre explosion, which poses a great safety hazard. A lot of tyres that seem to be in perfect condition suddenly explode, causing a huge impact on driving safety. Also, diagonal tyre is with high si
Read more

What's the Difference between Single Steer Tires and Double Steers Tires?

Image
  Single Steer Tires   Super single steer tyres  is unidirectional with all force. Its tread patterns are in the same direction with a good grip, so it is suitable for cars that often run at high speed. If there is no abnormal tire wear, you only need to switch back and forth on the same side. If one-sided tire wear occurs or the tire has run more than 10,000 kilometers, the tire needs to be switched from left to right.   The sidewall of super single steer tire  are marked with an arrow and a "Rotation" sign. The direction indicated by the arrow is the rolling direction of the tire. You can use this arrow to tell if the tire is reversed. If the front and rear tires are installed upside down, the tires will shake and wear easily when the vehicle is running.   When installing a single steer tire, the combination of tire and hub should also be considered. Install the tire on the wheel hub according to the specific position of the vehicle and the direction indicated by the arrow
Read more

So Much is Hidden in the Numbers on Truck Tyres

Image
  So Much is Hidden in the Numbers on Truck Tyres   Carefully observing the obvious position on the sidewall of heavy duty tyres , you would find a line of number + letter symbols similar to mathematical functions, such as 12.00 R20, 11.00 R20, 295/80 R22.5. And these numbers represent the basic information of the tyre. Take 12.00 R20 as an example, where 12.00 represents inch in British system, and 12 inch refers to tyre tread width. The larger the number, the wider the tire tread, hence the larger the grounding area, and the tire's grip will be improved to a certain extent.   The last two digits of 20 corresponds to the wheel hub, which is often called the diameter of the rim, in inches. Generally speaking, the larger the diameter of the hub, the greater its bearing strength. Many drivers who pull heavy loads tend to have larger diameter wheels with a certain thickness.   The letter R represents the type of tire. Most of the tires in the past did not have this letter. In the past
Read more